In March 2022, I signed leases on 12 apartments for our field crew working a utility project outside Houston. Furniture came from a dealer and landed in ten days. Appliances, I handled myself: price-shopped, ordered, accepted delivery, asked the installer to call me when it was done. Two months later, the complaints started. By the end of that year, I had cost my team roughly $8,200 in avoidable appliance mistakes — every one of them documented and now sitting on a shared checklist that runs 40 items deep.
Here's the part that still stings: none of the errors were about picking a bad brand. The machines were fine. It was everything around the machines — the instructions we didn't write, the questions our team didn't ask, the checks nobody scheduled. I've told this story to enough procurement leads to know it isn't unique to me.
First, the washers — and the cycle nobody ran
I ordered 12 LG front-load washers. Inverter Direct Drive motor, decent commercial warranty for our size, and I'd used them on a previous project. The units arrived, the installers stacked them, I signed the delivery sheet, and we moved on.
What I didn't know — or more accurately, didn't think to plan for — was the tub-clean cycle. LG builds it into the machine. The manual documents it clearly. But a washer tub-clean routine is only useful if someone actually runs it. Our turnover team didn't know about it. The residents didn't know about it. Nobody told anyone that after roughly 30 washes, the gasket and drum need attention or smells will build up.
Fast-forward six weeks and one tenant photographed the rubber seal and posted it in the crew's group chat. Once we saw it, we saw every machine. All 12 needed some level of deep clean. Three needed a technician visit. Around $640 total, or maybe $620 — I'd have to pull the invoice. Point is, it wasn't the cost of the service call that mattered. It was the fact that we bought an appliance with a maintenance requirement and never put that requirement into the operating plan.
What I do now: every unit gets a laminate card on the inside of the laundry door — how to run the tub-clean cycle, how often, what to check on the gasket. It's the cheapest thing we install.
The induction cooktop fight, and the griddle pan I wish I'd never bought
By the time we opened the second batch of units that fall, I thought I had the process figured out. Then we set up the upstairs kitchen — corporate apartment, three bedrooms, a real stove instead of the coil-top junk.
Our buyer recommended induction for energy and control. I agreed, we ordered a 30-inch unit, and it landed with the rest of the kitchen package. First tenant move-in, the resident pulls out a big griddle pan from the kit, sets it on the cooktop, turns it on — and nothing. The pan never heated. She called us thinking the range was broken.
Here's what I learned the hard way: an induction cooktop needs cookware with a magnetic, ferrous base. Cast iron works. So does magnetic stainless. Aluminum — and every cheap pan with a copper disc in the bottom — does not. Our “griddle pan induction cooktop” setup failed because the pan kit we'd spec'd was aluminum. $35 of pans turned into $250 for a replacement set plus a very awkward first-night dinner.
The oven took longer to get right. I spent three weeks comparing “best built-in oven” reviews and I want to save you the trouble: for a corporate apartment, the best built-in oven is not the one that wins the design awards. It's the one with a convection fan, a basic touch panel that isn't a failure point, parts that ship in three days, and a warranty that actually covers the control board. We landed on a mid-tier convection model after calling two people I trust who had bought them at volume. Zero issues since install.
If I'd written one line into the spec — “cookware must have a magnetic base” — I'd have saved $250 and a complaint I still hear about.
The space heater incident — and the question I never asked
January 2023, the Houston freeze. One of the upstairs apartments had a heat pump that kept tripping, and the on-site resident pulled out an old ceramic space heater his brother had given him. He left it running overnight.
No fire. But by morning the wall outlet faceplate was scorched, the receptacle behind it had char marks, and the paint around the unit had bubbled. Repairs came to just over $1,180 between the wall, the outlet, and four days of taking that apartment offline. Our insurer flagged it and now requires a heat backup plan per unit.
The question I get from clients constantly — “can you leave space heater on all night” — is the one I should have answered before we ever had a problem. The honest answer is: yes, most portable heaters are listed for overnight use, but only if the circuit is correct, the heater is on a hard surface, and nothing is covering it. The heater in that apartment wasn't defective. The wiring was. The building had a run of aluminum branch wiring that we didn't fully understand until we had it inspected. Now every unit gets a pre-occupancy electrical check. That check is $180 per unit and it's worth every dollar.
The shift for me was realizing that I wasn't buying appliances. I was buying a chain of responsibility that starts at the panel and ends at the user manual.
What I do differently — and why I ask about costs that aren't listed
None of the problems above came from a bad brand choice. They came from four predictable gaps:
- We bought equipment without planning the maintenance cycle into the cost.
- We left instruction where we should have left documentation.
- We spec'd accessories from glossy catalog pages instead of the actual use case.
- We skipped the last 100 feet of the property — the wall, the circuit, the outlet — until it bit us.
Our checklist now opens with a question that sounds almost too simple: what's not included? Is freight included past the ground floor? Does installation include haul-away of the old unit? Does the warranty cover labor, or just parts? What does the service contract cost per year beyond the purchase price?
I'll admit — the first time I asked a supplier what wasn't covered, I felt like I was revealing how little I knew. I got over that after the $8,200 hit. What I want now is the supplier who hands me a quote that reads like a bill instead of a brochure — line items for freight, stairs, haul-away, install, service, and a fax-back sheet for open questions. The one that came in about $70 per unit higher than the estimate but listed every fee went on to become our preferred vendor for the next two years.
Because here's the thing I keep coming back to: the number on the quote was never the problem. What cost me money was the stuff that lived in the gap between the quote and the reality of a lived-in apartment. Appliances are the easy part. The plumbing, the wiring, the manual, the schedule — that's where the budget actually goes.
I keep the checklist pinned next to my monitor. The first line is still “what's not included.” The second line is “who runs the tub-clean cycle.” I told you — I'm not making that mistake twice.
Ask about this topic